Author Topic: Registering newly imported C3 - Engineer's certificates and Blue slips  (Read 9384 times)

0 Members and 1 Guest are viewing this topic.

Offline 73Vette

  • Newbie
  • *
  • Posts: 8
  • I'm new here
Hi All,

I am new to the club and the forum. I have recently purchased a 1973 Corvette 454. It was imported by GM Downunder in Queensland and it has had everything done to make it roadworthy for NSW, including new seat belts, lights, etc. I expect to take delivery in the next few weeks.

I have found out that to get it registered I will need to get a blue slip. If anyone knows of a good place to get a blue slip could you please send me a message. I live in the Sutherland Shire. If anyone can confirm that I will definitely need an Engineer's certificate this would also assist me. From what I have read the cost can vary a bit from one certifier to another. Again if anyone knows a good certifier please send let me know.

Any comments as to other members recent experiences would be welcome.
 :huh:
America is all about speed. Hot, nasty, badass speed. -Eleanor Roosevelt, 1936

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #1 on: September 28, 2013, 06:09:40 PM »
73
Welcome  to the forum
Rego n blue slip
Engineer report maybe  do you knw when the car was manufactured
PM MESSAGE
 Bfit
 
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline 73Vette

  • Newbie
  • *
  • Posts: 8
  • I'm new here
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #2 on: September 28, 2013, 06:17:58 PM »
From what I can work out by the VIN sequence number the car was manufactured in December 1972.
America is all about speed. Hot, nasty, badass speed. -Eleanor Roosevelt, 1936

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #3 on: September 28, 2013, 06:21:43 PM »
Any paperwork you fill out quote it as a 72
And a December manufacture date

Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline gtc

  • Supercharged
  • ******
  • Posts: 1464
  • Car: 1970 454 Manual
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #4 on: September 29, 2013, 10:37:05 PM »
Give Steve at Hornsby a call on 9987 0088.

He does blue slips and owns two C3s himself.
It's C3 chromie for me, see? Si!

Offline StephenSLR

  • Fuel Injected
  • *****
  • Posts: 703
  • Location: Sydney
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #5 on: September 30, 2013, 03:19:46 PM »
I have found out that to get it registered I will need to get a blue slip.

Why do you think that?

Every man and his dog has an opinion on it, many are wrong.

s

Offline 73Vette

  • Newbie
  • *
  • Posts: 8
  • I'm new here
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #6 on: September 30, 2013, 04:01:07 PM »

I am going on what I have been told and some info on the rms website. If I am misinformed and only a pink slip is needed I would be more than happy to try to proceed that way.
America is all about speed. Hot, nasty, badass speed. -Eleanor Roosevelt, 1936

Offline StephenSLR

  • Fuel Injected
  • *****
  • Posts: 703
  • Location: Sydney
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #7 on: September 30, 2013, 04:24:04 PM »
I am going on what I have been told

Exactly what was said?  They must've given some reason.

Are there any modifications?

s

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #8 on: September 30, 2013, 04:26:50 PM »
I am going on what I have been told and some info on the rms website. If I am misinformed and only a pink slip is needed I would be more than happy to try to proceed that way.

Mate he is rite every man and his dog has opinion
to get a car on full registration IN NSW you need blue slip
the only time you don't need a blue slip is if the car has been registered in NSW and that registration has lapsed  less than 3 month.
some Queensland vehicle suppliers will organize  a the blue slip through their contact IN NSW on your behalf
give that contact a ring that is listed earlier in the thread
 Mate another  thing  you will need to be able to read the chassis number on the chassis
its in the LH rear wheel well just above no 4 body mount
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline StephenSLR

  • Fuel Injected
  • *****
  • Posts: 703
  • Location: Sydney
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #9 on: September 30, 2013, 04:38:55 PM »
to get a car on full registration IN NSW you need blue slip

Oops, I was thinking engineer's cert.

Yes, you definitely need a blue slip.  An engineer's cert is only required if the car has had mod's and that can be subject to opinion.

s

Offline StephenSLR

  • Fuel Injected
  • *****
  • Posts: 703
  • Location: Sydney
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #10 on: September 30, 2013, 04:43:21 PM »
If it's reasonably stock, you can take it to Chris Sinclair at SMS Performance in Padstow for a blue slip.

9771 4144

If you need a tow give Ed from H.Reid & Sons a call.

0418 618 905

s

Offline VETTENUT

  • Fuel Injected
  • *****
  • Posts: 500
  • Location: Forster NSW
  • Mood: Absolutely fantastic
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #11 on: September 30, 2013, 05:37:00 PM »
Or NSW Corvettes ClUb sponsor and member Mid-City Towing 9759-0299. Ask for Tony.
Now living the dream in God's country!

Offline StephenSLR

  • Fuel Injected
  • *****
  • Posts: 703
  • Location: Sydney
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #12 on: September 30, 2013, 06:15:08 PM »
If I am misinformed and only a pink slip is needed I would be more than happy to try to proceed that way.

If you want to run it on club plates you only need a pink slip, the rego is cheaper too but you're limited as to when & where you want to drive it.

s

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #13 on: September 30, 2013, 06:24:39 PM »
If you want to run it on club plates you only need a pink slip, the rego is cheaper too but you're limited as to when & where you want to drive it.

s

The road authority keep moving the goal posts
So I am not 100% sure on this
I believe to get a pink slip you need to have  a currently registered   Vehicle
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline StephenSLR

  • Fuel Injected
  • *****
  • Posts: 703
  • Location: Sydney
Re: Registering newly imported C3 - Engineer's certificates and Blue slips
« Reply #14 on: September 30, 2013, 07:32:03 PM »
The road authority keep moving the goal posts
So I am not 100% sure on this
I believe to get a pink slip you need to have  a currently registered   Vehicle
Bfit

From my last experience, just over a year ago, I was having issues getting a blue slip without an engineer's certificate from a particular mechanic.  The mechanic said however, he'd give me a pink slip no problems.

Now whether I could use that to get club rego ... I don't know but the mechanic seemed to think it was one way I could get to drive around legally before going for a blue slip at a later date.

s